 |
FAQ
|
Q: What conditions contribute to mold?
- Flood or hurricane damage.
- Stained ceilings or walls
- Leaky toilet seal or bathtub drainage problems.
- Leaky roof or flashing installed improperly.
- Black, brown, orange, pink, or green speckled walls or around any plumbing grout or tile.
- Musty, earthy, or urine scented odor.
- Deficient siding, siding that is not covering a building adequately.
- Wood siding where the paint has cracked and water has intruded.
- Swollen, crumbling walls or buckling floor boards.
- Sewer backup which has caused water harm.
- Leaky window or door.
- Washing machine overflow, washing machine leaks such as drain valve phalanges, leaky gaskets, etc.
- Lack of ventilation.
- Relative humidity over 55%.
- Damp basements.
↑Back to Top |
Q: Why should I purchase an air purification unit?
A: Indoor Air Quality is becoming a major problem. We are using more cleaning chemicals, toxins are given off fabrics used for drapes and furniture. Formaldehyde is used in the manufacture of wood products in our homes and they give off toxins, in what is known as “Off Gassing” and these toxins are trapped in the home, office or building. The use of a good Air Purifier will remove dust, pollen, and particulate matter from the air in the environment.
↑Back to Top |
Q: What types of air purification units are available?
A: There are many different types and shapes of air purifiers on the market and there are a variety of prices. All of the products work to varying degrees to remove particulates from the air, however most require the problem to come to the unit for it to do its job. Environmental Solutions has researched the market and can offer to you products guaranteed to improve your indoor air environment that will destroy mold, bacteria, such as E-Coli and Salmonella by going out and searching out the problem in it’s hiding place.
↑Back to Top |
Q: What steps can be taken to prevent the return of Mold?
A: With the implementation of the NORMI Sanitization Protocol is recommend to prevent the future mold growth. Although NO WARRANTY as to the possibility of new mold growth can be offered, following the prescribed Sanitization Protocol will reduce the possibility of the return of mold growth.
Please ask about our “Certificate of Sanitization” and the benefits this program will afford the home or building owner.
↑Back to Top |
Q: What is mold?
A: Molds are microscopic organisms found virtually everywhere, indoors and outdoors. Strachybotrys Chartarum is a toxic mold. Stachybotrys is a greenish-black toxic mold that colonizes particularly well in high-cellulose material such as straw, hay, wet leaves, dry wall, carpet, wall paper, fiber-board, ceiling tiles, thermal insulation, etc. Before drying, Stachybotrys is wet and lightly slimy to touch. The toxi mold grows in areas where the relative humidity is above 55%. Stachybotrys produces a mycotoxin that causes mycotoxicosis. This type of mold is thought to be possible to cause of the "sick building
syndrome" and a multitude of "building related illnesses".
↑Back to Top |
Q: Do you accept Credit Cards?
A: We accept Visa and
MasterCard.
↑Back to Top |
Contact us today at: 727-789-8959 or
email: mike@environmentalsolutions.biz.
|
|
|
